祝賀 東莞百*實業有限公司 5月通過RCS認證
公司名稱：東莞百*實業有限公司
驗廠項目：RCS認證
咨詢公司：深圳市肯達信企業管理顧問有限公司
通過審核公司介紹：
東莞百*實業有限公司經營范圍：生產和銷售鞋材、特殊粘扣帶、特殊織帶、射出勾、針織帶、運動用品、袋類成品、織帶、電子產品保護套及配件、綁線帶類、運動保健用品、織品吊帶及手機飾帶、吊飾帶類、汽車座椅套、服裝類產品（不含洗水、漂染工序）。從事道路普通貨運（憑許可證經營）。設立研發機構，研究和開發粘扣帶、松緊帶、各色織帶及3C電子產品保護套及配件。生產和銷售化學纖維產品（涉及行業許可管理的按照國家有關規定辦理申請）。自有廠房出租業務（涉及國家專項規定管理的按有關規定辦理）。
熱烈祝賀 東莞百*實業有限公司，在經過肯達信顧問的輔導后，于5月順利通過 RCS認證
RCS認證輔導---Recycled Claim Standard 2013（A3 Compliance Requirements – Production）
A3 Compliance Requirements – Production
A3.1 Application of Production Requirements
Organizations involved in production of RCS goods are subject to RCS certification. The TE Recycled ClaimStandard requires compliance with the requirements (sections A, B, C and D) of the Content Claim Standard,whereby the ‘Claimed Material’ is replaced with ‘Recycled Material’ as defined in section A1.2f.
A3.2 Production
In addition to the requirements of the CCS, all organizations involved in the production of RCS
products must meet the following requirements:
A3.2a All recycled materials entering the supply chain must have a valid Transaction Certificate (TC) issued by an approved CB.
A3.2b The amounts of pre-consumer and post-consumer waste must be recorded separately at allsteps of production.
A3.2c Traders with an annual turnover of less than $10,000 of RCS goods, and retailers selling to endconsumers only, are exempt from the certification obligation; provided that they do not (re-)pack or (re-)label RCS Goods. Exempted traders with less than $10,000 annual turnover of RCS Goods must register with an Approved Certification Body and must inform the Certification Bodyimmediately once their annual turnover exceeds $10,000, or once they plan to (re-)pack or (re-)label RCS goods.
A3.2d In cases where there is the possibility of differential rates of production loss between recycled and virgin inputs, organizations must address this through their mass balance formula.
A3.2e Buyers of the RCS product will be responsible to set any further requirements on the specificstandards or requirements to which the input material must be certified. These additional requirements are separate from the RCS and its certification process.